DEMCO
850-Gallon Big Wheel Sprayer
Available with
66'/80'/90’ boom
CALL FOR QUOTE
Features
·
The 850-gallon polyethylene tank has a 16” flip-top lid and
two high volume jet agitators.
Its molded-in trough drains spills to rear of
sprayer.
·
MT-3405F II controller
·
120-gallon rear mounted rinse tank
·
2-1/2 gallon hand wash tank
·
1/4” steel-formed frame with 30” ground clearance, reducing
crop damage
·
Fold-away ladder provides easy access to the large work
platform for added safety when filling tank
·
One of the shortest “hitch pin to axle” lengths in the
industry – 140”
·
7000 lb tongue jack
·
Large storage compartment conveniently located for storing
extra nozzles, clamps, etc
·
Single tube hitch frame allows for improved turning.
The cast hitch can be adjusted vertically in 1-1/2”
increments
·
5” x 5” axle with 90” to 144” infinite adjustment and 3”
bolt-in spindles
·
13.6 x 38 bias tires with 38” wheels
·
50 mesh main filter and 80 mesh feeder line filters prevent
tip plugging
·
2” quick couplers for bottom filling tanks
·
The hydraulic front fold booms feature a nitrogen charged
accumulator system combined with leveling linkage and shock
absorbs to soften the ride.
Live hydraulic control block requires only one set of
remote outlets to perform all boom functions.
·
Booms feature wing fold, hydraulic height adjust,
independent wing leveling and outer wing breakaway
·
Boom can be folded to spray in a 60’ or an unfolded 80/90’
width
·
Boom folds to a transport width of 12’
·
Light system consists of flasher/turn signal and taillights
for added road safety
·
Unique hydraulic glide suspension system makes the boom
wings weightless.
Guide wheels activate the hydraulic system and
automatically adjust for uneven terrain.
Guide wheels have puncture proof tires (optional).
·
Tractor must be equipped with closed center hydraulic system
NOTE:
Sprayer is less spray tips; factory setup is
standard; all sprayer plumbing tested to 90 PSI.
|
